Metallkraft ULMS 420, Инструкция по эксплуатации

Страница: 20 / 40

20 ULMS-Series | Version 2.04
Disposal, Recycling of old Equipment
12 Disposal, Recycling of old
Equipment
In the interests of the environment, care must be taken to
ensure that all components of the machine are disposed
of in the proper and approved way.
12.1 Decommission
Disused equipment must be taken out of service immedi-
ately in order to avoid later misuse and endangering the
environment or people.
- Dispose of all environmentally hazardous fluids from
the old device.
- If necessary, disassemble the machine into mana-
geable and usable components and components.
- Supply the machine components and operating ma-
terials to the appropriate disposal channels.
12.2 Disposal of electrical equipment
Electrical equipment contains a variety of recyclable ma-
terials and environmentally harmful components. These
components must be separated and properly disposed
of. If in doubt, contact municipal waste management.If
necessary, the help of a specialized waste disposal com-
pany can be used for the treatment.
12.3 Disposal of lubricants
The disposal instructions for the lubricants used are pro-
vided by the lubricant manufacturer. If necessary, ask for
the product-specific data sheets.
12.4 Disposal via municipal collection
points
Disposal of used electrical and electronic equipment
(Applicable in the countries of the European Union and
other European countries with a separate collection sy-
stem for these appliances).
The symbol on the product or its packaging indi-
cates that this product should not be treated as
normal household waste, but must be returned
to a collection point for the recycling of electrical and
electronic equipment. By helping to properly dispose of
this product, you are protecting the environment and the
health of others. Environment and health are endangered
by improper disposal. Material recycling helps to reduce
the consumption of raw materials. For more information
about recycling this product, contact your local commu-
nity, municipal waste management, or the shop where
you purchased the product.
13 Spare parts
13.1 Spare parts orders
Spare parts are available from authorised retailers.
Always quote the following key data with your spare
parts orders:
- Device type
- Item number
- Quantity
- Designation
- Desired shipping type (post, freight, sea, air,
express)
- Shipping address
Spare parts orders without above given information can
not be considered. If the shipping method is missing,
shipping will be at the discretion of the supplier. Informa-
tion on the device type, article number and year of manu-
facture can be found on the type plate, which is attached
to the machine.
Example
The sawblade for the underfloor light metal circular saw
ULMS 420 must be ordered. The sawblade has the
number 10 in the spare parts drawing 2.
By ordering spare parts, send a copy of the spare parts
drawing (2) with the marked part (sawblade) and marked
positon number (10) to the dealer and provide the follo-
wing information:
Type of device: Automatic light alloy metal-cutting saw
ULMS 420
Item number: 3627420
Drawing number: 2
Position number: 10
Item number of your device:
Automatic light alloy metal-cutting saw ULMS 420
3627420
Automatic light alloy metal-cutting saw ULMS 500
3627500
NOTE!
The manufacturer warranty shall be rendered void in
the event of a use of unauthorised spare parts.
DANGER!
Risk of injury caused by the use of
incorrect spare parts!
The use of incorrect or faulty spare parts may cause
risks for operating staff and damage as well as mal-
functions.
- Exclusively genuine spare parts made by the manu-
facturer or spare parts authorised by the manufac-
turer shall be used.
- Always contact the manufacturer if you are unsure.