Metallkraft ULMS 420 Скачать руководство пользователя страница 4

4

ULMS-Series | Version 2.04

Safety

Tips and recommendations

Observe the safety information in these operating in-
structions to minimise the risk of personal injury as well 
as material damage and prevent hazardous situations. 

2.2 Operator responsibility 

The operator is the person who operates the machine 
himself for commercial purposes or who leaves it to a 
third party for use or application and who bears legal pro-
duct responsibility for the protection of the user, staff or 
third parties during operation.

Obligations of the operator:

If the machine is used for commercial purposes, opera-
tors are subject to the legal stipulations in terms of occu-
pational safety. For this reason, the safety instructions in 
these operating instructions as well as the safety, acci-
dent prevention and environmental protection regulations 
valid at the installation location must be complied with. In 
this process, the following shall apply in particular:

- Operators shall obtain information about valid oc-

cupational safety regulations and determine addi-
tional hazards as part of a risk assessment which 
result from the specific operating conditions at the 
machine's installation location. Said risk assess-
ment shall be reflected in operating instructions for 
machine operation.

- During the entire period of use of the machine, the 

operator must check whether the operating instruc-
tions correspondent the current status of the regu-
lations and if necessary adapt them, adapt them if 
necessary

- Operators shall clearly manage and specify the re-

sponsibilities for installation, operation, trouble-
shooting, maintenance and cleaning.

- Operators must make sure that all persons han-

dling the machine have read and understood these 
operating instructions. Operators must also regu-
larly train staff and notify of the hazards.

- Operators shall provide staff with the required pro-

tective equipment and wearing the required protec-
tive equipment shall be mandatory.

Operators shall also be responsible for maintaining the 
machine in a technically perfect condition. For this rea-
son, the following shall apply:

- Operators shall make sure that the maintenance in-

tervals described in these operating instructions 
are complied with.

- Operators shall regularly check that the safety 

equipment is fully functional and complete.

2.3 Qualification of the staff

The different tasks described in these operating instruc-
tions require different levels of skills in terms of the quali-
fications of operating staff working with the machine. 

Exclusively persons of whom it can be expected that 
they reliably complete assigned tasks shall be author-
ised to carry out any tasks. Persons whose reactions 
have been impaired shall not be authorized, e.g. drug us-
ers, users under the influence of alcohol or medication. 

DANGER!

This combination of symbol and signal word indicates 
an imminently dangerous situation that will result in 
death or serious injuries if it is not avoided 

WARNING!

This combination of symbol and signal word indicates 
a possibly dangerous situation that will result in death 
or serious injuries if it is not avoided. 

CAUTION!

This combination of symbol and signal word indicates 
a possibly dangerous situation which can lead to 
minor or light injuries if it is not avoided. 

ATTENTION!

This combination of symbol and signal word indicates 
a potentially dangerous situation that can lead to pro-
perty and environmental damage if it is not avoided. 

NOTE!

This combination of symbol and signal term indi-
cates a potentially dangerous situation which may 
cause material damage or harm the environment if it 
is not averted.

Tips and recommendations

This symbol highlights useful tips and recommenda-
tions as well as information for efficient and reliable 
operation. 

WARNING!

Risk from inadequately qualified 
persons!

Inadequately qualified persons are unable to assess 
the risks when handling the machine, thus putting 
themselves and others at risk of severe injuries. 

-  All work must be carried out by qualified persons 

only.

-  Keep inadequately qualified persons and children 

away from the work area.

Содержание ULMS 420









































Отзывы: