Metal-Fach Z587, Руководство по эксплуатации

Страница: 42 / 52

42
OPERATING MANUAL - Z587 BALER
Troubleshooting / Baler shipping
The hydraulic system does
not work.
No power on hydraulic
outputs.
Open the hydraulic outputs
in the tractor cab.
The hydraulic lines are
not connected in the right
order to the hydraulic
external connectors on the
tractor.
Check and properly
retighten the quick-release
couplings of the tractor
hydraulic system.
Insufficient oil flow rate.
Check and refill the
hydraulic oil level on the
tractor.
The pump is worn out
or has failed (low output
pressure).
Repair or replace the
tractor hydraulic pump.
The hydraulic circuit is
contaminated.
Blow clean and clean
the hydraulic oil filters, if
necessary.
The oil leaks from the
cylinders.
Replace the actuator seals.
The oil leaks from the
hydraulic system.
Check and properly
retighten the hydraulic line
couplings.
CONTROL PANEL
Message "Wrapping error"
with sound.
No wrapping medium left
(cord / net).
Refill the cord/net bins.
The bale fails to catch the
cord/net.
Start wrapping with some
material on the pickup.
Incorrect sensor distance
from the screw.
Set the sensor 2-3 mm
away from the screw.
The chamber is closed,
but the screen messages
"Chamber open".
Incorrect sensor distance
from the lever.
Set the sensor 2-3 mm
away from the lever.
7. BALER SHIPPING
7.1. TRANSPORT OF LOADS
The baler can be shipped by road and rail vehicles with
appropriate load bearing capacity.
NOTICE
Lifting equipment shall be operated by trained and
qualified personnel only.
WARNING!
See Fig. 48 for the sling lifting points.
Fig. 48. Sling lifting points.
Do not carry the baler with a bale inside the chamber.
Secure the baler to the carrier vehicle for the duration of transport.