Metal-Fach Z587, Руководство по эксплуатации

Страница: 30 / 52

30
OPERATING MANUAL - Z587 BALER
Maintenance and adjustment
Use original spare parts only
NOTICE
The original spare parts from Metal Fach are manufactured according
to the specific requirements of Metal Fach machines.
Parts from other manufacturers are not inspected or approved by
Metal Fach.
Use original Metal Fach spare parts only to avoid risk of hazard.
Table 4. Bolt tightening torque values.
R=8.8
Nm
R=10.9
Nm
R=12.9
Nm
mm
M3 1.3 1.8 2.1 6
M4 2.9 4.1 4.9 8
M5 5.7 8.1 9.7 9
M6 9.9 14 17 10
M8 24 34 41 13
M10 48 68 81 17
M12 85 120 145 19
M14 135 190 225 22
M16 210 290 350 24
M18 290 400 480 27
M20 400 570 680 30
M22 550 770 920 32
5.1. ADJUSTMENT OF PICKUP WHEELS
The pickup work position can be adjusted. To do this:
• Set the appropriate working height of the pickup by changing the
position of the support wheel.
• Use the pin to secure the setting.
Fig. 24. Pickup working height adjustment.
Pin
Support wheel