Mestek 44625000, Инструкции по сборке, установке и эксплуатации

Страница: 21 / 45

Form 44201460 21
Mar 2019
HEAT SHIELD INSTALLATION 13.0)
A heat shield can be used to reduce the clearance to combustible distances. Refer to Minimum Clearance to
Combustibles in Section 4). The heat shield is available as an accessory Kit No. 44566300.
Item No. Part No. Description Quantity
1 02359000 #10-24 ACORN NUT 2
2 02358000 TEFLON WASHER 4
3 02186010 #10-24 SS LOCKNUT NUT 2
4 02352000 PHSMS #8 x 1/2" AB POINT SS - BLK OXIDE 8
5 44568139 RAIL - HEAT SHIELD HANGER - PAINTED 1
6 44566189 HEAT SHIELD - ROLLED/PAINTED 1
7 44568149 HOLDER BRACKET - PAINTED 2
8 43247112 LABEL, INDOOR CLEARANCES (with heat shield) 1
The heat shield position on the heater is dependent on the heater mounting angle. Use the angle gauge provided
with the heater to determine the mounting angle before proceeding with the heat shield assembly. See Section
12.1
See below for installation steps.
Step 1. Use the angle gauge shown below to determine the mounting angle of the heater.