Mestek 44625000, Инструкции по сборке, установке и эксплуатации

Страница: 15 / 45

Form 44201460 15
Mar 2019
PN Description Picture
44604500 Gas Connection Kit- 1/2"-Includes
Gas Connector, Manual Ball Valve,
Sediment Trap (Tee, Cap, Nipple),
Thread Sealing Compound
03307260 Gas regulator 2psig to 11” w.c. ½”
NPT inlet and outlet.
40147010 3 Position Switch Kit,
(High/Low/Off) for manual heater
control (N2/L2)
44195000 Two Stage Relay Kit (one per
heater required) for controlling
multiple heaters w/a single 24V
Two Stage thermostat
UNPACKING THE HEATER 11.0)
The heater and ceramic glass are shipped separate but in the same box. Care must be taken
when up-packing the heater. Carefully open the top of the heater as indicated on the labels at the side of the
shipping box. An angle gauge is attached to the heater’s control side with tape and is needed for installation (see
Section 12.1).
The glass is located on top of the heater and is wrapped in cardboard cradled into the foam end pieces. Carefully
remove the top foam pieces and remove the cardboard wrapped glass. Care must be taken that during handling
the glass does not slide out of the cardboard wrap. Store the glass in a secure location for later assembly.
It is recommended that two people lift the heater out of the carton. Do not remove from the
remaining packaging until the heater is ready to be hung.