4. Web-based Interface
44 NCR875E(H)/NCR875PRO(H)
l
User Manual
Select
OFF
to disable the motion detection
Motion Area Setting
Motion area setting:
Click target squares displayed on the screen to define detection areas; once
configured, click
Save Motion Area
to save settings
.
Action
Specify the action to be taken when an alarm is triggered upon motion detection:
OFF:
No action will be taken, but an alarm will be logged.
FTP:
Recorded video clips/JPEG files will be uploaded to the FTP server when alarm is triggered.
SMTP:
Notification email with the recorded JPEG files attached will be sent to the SMTP server.
SD Card:
Recorded video clips will be saved to the SD card when the alarm is triggered.
4.5.2 External Alarms
If external alarm devices, e.g., sensors and alarms, are connected to the camera’s alarm input/output, the
following settings must be made:
Configuration
Setting:
Enable the Alarm I/O that is connected with the respective external alarm device.
Level:
Set the (electricity) current as low or high to define the active state.
Action
Specify the action to be taken when external alarm is triggered:
OFF:
No action will be taken, but an alarm will be logged.
FTP:
Recorded video clips/JPEG files will be uploaded to the FTP server when alarm is triggered.
SMTP:
Notification email with the recorded JPEG files attached will be sent to the SMTP server.
SD Card:
Recorded video clips will be saved to the SD card when the alarm is triggered.
