4. Web-based Interface
NCR875E(H)/NCR875PRO(H)
l
User Manual 39
4. Wait about 20~60 seconds until the file is successfully updated.
Once the update is completed, the
browser will show a message reads “Firmware update successful”. Then it will take 60 seconds to restart
the camera.
5. The utility will automatically go back to live view screen after firmware has been updated successfully.
You can also perform these tasks on the
Firmware
page:
Restart camera:
Restart the camera. This will cause all streams to disconnect.
Factory Default:
Reset all of the camera settings to the defaults, except network settings. After you
confirm to reset, the camera will reset and restart automatically. When complete, you will return to the live
view page.
Hardware Factory Default:
Reset all of the camera parameters to the defaults, including the network
settings.
