2 NCR875E(H)/NCR875PRO(H)
l
User Manual
Safety Notice
Make sure the supplied voltage meets the power consumption requirements of the camera before
powering the camera on. Incorrect voltage may cause damage to the camera.
The camera should be protected from water and moisture, excessive heat, direct sunlight and cold.
The installation should be made by a qualified service personnel and should conform to all local codes.
Unplug the camera during lightning storms or when unused for long period of time.
Operating Notice
This Bullet Network camera should use power source as follows:
• 12VDC/24 VAC or by POE (IEEE 802.3af) for NCR875E and NCR875PRO.
• 24VDC/24VAC for NCR875EH and NCR875PROH.
Avoid viewing very bright objects (e.g. light fixtures) for extended periods.
Avoid operating or storing the unit in conditions as follows:
• Extremely humid, dusty, hot/cold environments where the operating temperature is outside the
recommended range of -40°C to +55°C (NCR875EH and NCR875PROH) or -10°C to +55°C (NCR875E
and NCR875PRO).
• Close to sources of powerful radio or TV transmitters.
• Close to fluorescent lamps or objects reflecting light.
• Under unstable light sources (may cause flickering).
