Merrithew Health & Fitness SPX Max Plus Reformer, Руководство пользователя

Страница: 30 / 36

Reformer Owner’s Manual 30
Replacement Parts
For more information and to place an order, visit
merrithew.com/replacementparts
or email
equipment@merrithew.com
Footbar
Single mount footbar uses 1/4" hex key
Double mount footbar uses 3/16" hex key
With the correct sized hex key, fasten the
footbar [7] to the large swing arm bars
[13] with socket head cap screws [11].
With footbar in place, apply pressure to
footbar before tightening socket head cap
screws. Tighten completely only when
both sides of footbar are attached to
ensure proper alignment.
NOTE: Socket head cap screws are
attached to the ends of the replacement
footbar when it is shipped.
Travelling Pulley
w
Unscrew and remove the top screw of
the vertical sliding track [60].
w
Remove the pulley block by releasing
the spring loaded stopper [68] and
sliding up until it releases from the
vertical sliding track.
w
Slide on replacement travelling pulley
[58] ensuring spring loaded stopper is
on the bottom (see photo above).
w
Reattach vertical sliding track to frame.
Floating Rollers
Floating
Roller
Bronze
Bushing
With carriage [15] removed from aluminum
rails
(see page 22) , slide floating rollers [38]
into bronze bushings [39] (see page 27) .
Replace carriage (see page 23) .
CAUTION:
Never use oil lubricants as they
may damage rollers.
Fixed Rollers
With carriage [15] removed from aluminum
rails
(see page 22) , attach fixed rollers [37]
with the aid of a ratchet and 1⁄2" socket
attachment
(see page 27).
CAUTION:
Never use oil lubricants
as they may damage rollers.
Spring Clips
Replace spring clips every 12 months or
earlier as needed.
CAUTION:
Locking spring clips [76] must
be used to attach push-thru springs [75].
to the vertical frame from below.
Do not
use non-locking spring clips.
Safety Chain
For use with push-thru bar [64] on the
vertical frame.
CAUTION:
Safety chain [57] must be in
place when using push-thru springs [75].
from above.
Shoulder Rest Pads
Only shoulder rest pads are shipped for
replacement.
To install: Loosen bolts on
handle frames, remove worn pads, replace
with new and tighten bolts.
Carriage Stopper
Only one is needed per Reformer.
IMPORTANT:
Must be in one of the six
positions AT ALL TIMES.
Reformer Ropes
Strong, pliable and durable, these
retractable rope system ropes are 13' length.
See page 28 for installation directions.
Traditional ropes (8' length) also available
for older Reformers without the retractable
rope system. Sold in pairs.
MAINTENANCE & REPLACEMENT PARTS