21
Lowering the Reformer
To ensure your safety two people are required to lower a Reformer.
2.
Holding the Reformer in place, use your
foot to push in one leg of the stand [54],
until it is fully folded under the wooden
standing platform [1]. Repeat for the stand
on the other side.
It is strongly recommended that
footwear is worn during this step.
5.
Continue lowering the Reformer.
Bring to waist-height to prevent the frame
from making contact with the floor, and
roll the Reformer to its destination.
1.
To prepare to lower the Reformer,
position one hand on each of the
side rails [14] of the Reformer.
4.
Shift one hand to grasp the front end
crossbar, then the other hand.
3.
Walk your hands up the rails [14] as
you back up and lower the Reformer
towards you.
We recommend a second person
assists you in holding the Reformer.
6.
Reset the the carriage stopper [47],
footbar [7] and springs [28] as desired
and attach the vertical frame or accessory
boards if needed.
