Adjust Ropes
Insert Shoulder Rests
Reformer Owner’s Manual
10
6.
Insert shoulder rests [17] into receptacles with handles
facing pulley posts and closest to outside edges of carriage.
8.
Remove double-ended swivel spring clips [19], pinch end loop
of ropes [24] and insert through the front of pulleys [26].
10.
Place Soft Reformer Loops [18] on carriage [15] to
line up fixed D-rings on straps with end of metal plate on
shoulder rests [17].
12.
To shorten length slightly, pinch ropes [24] between
carriage [15] and self-locking cleats [45 ] and pull toward carriage.
Grasp ropes at retaining hooks [48] and tug to engage cleats.
7.
To extend ropes, push rope down and out of retaining
hook [48] and lift out of self-locking cleats [45]. Pull out rope
length required.
9.
Reattach double-ended swivel spring clips [19] and
Soft Reformer Loops [18].
11.
Once rope length has been determined, reset ropes in self-
locking cleats [45] then set fully into rope retaining hooks [48].
ASSEMBLY & SET-UP
Assembling the Reformer
cont’d
