Merloni Elettrodomestici
DISHWASHER EVO3
Service manual
EN
03-05-20/0
41-54
Language Issue/Edition
Page
7
SALT INDICATOR LIGHT
First installation, new dishwasher
The salt container is empty
and the indicator light stays on for five
consecutive cycles (only the first time, even if you were to fill salt at the 1st,
2nd, 3rd and 4th cycles) for both the 60cm and the 45cm widths.
Fill the salt container with water and add 1.5 - 2 kg of salt.
Salt meter
The algorithm (in the BIT 100) counts the activation of the regeneration
solenoid at the end of each cycle. At the end of the 29th cycle the dishwasher
fills 600cc of water and turns on the “S” (salt) indictor light.
At the start of the next cycle
fill the salt container as follows:
• Open cap
N.B.
Add salt to the salt container before starting the next cycle.
600cc
water
SUMP
WATER SOFTENER
