MERLO PANORAMIC, Руководство пользователя и по обслуживанию

Страница: 5 / 200

1 - INTRODUCTION
1 - 3
SYMBOLS USED IN THE MANUAL
The operator manual contains some graphic symbols which help the user understand the importance of instructions and
highlight any specific precautions to be taken or general notes:
WARNING!
This symbol indicates important messages aimed at ensuring driver and vehicle safety. In such cases it is
necessary to carefully read the text following the symbol and strictly follow the instructions given.
NOTE!
This symbol indicates a closer description of an instruction and aims at highlighting a part of the text.
HEXAGONAL WRENCH
This symbol is used to identify the dimension of the wrench to be used for some operations described in the
manual.
The type of wrench is indicated only if different from the standard one.
OPERATOR MANUAL SYMBOL
This symbol is shown on some machine plates and warns the operator that the explanations contained in the
Operator manual shall be carefully read before using the control.
WORK ENVIRONMENT
The machines manufactured by Merlo S.p.a., are designed to be used within the following environmental temperature ranges:
- minimum temperature: - 20°C
- maximum temperature: + 40°C
Always take the atmospheric and climatic conditions of the workplace into account.
Special applications may be provided on request for particularly cold or hot environments.
A single fire extinguisher should be fitted on the machine when the workplace does not have external fire extinguishing
equipment and the risk of fires exists.
The machine is supplied with a leaflet stating the maximum permissible wind under normal operating conditions. Before using
the machine read the table showing the Beaufort scale to estimate wind strengths, so that you can check whether there are the
right conditions to ensure safety when working at a certain height. Please note that the maximum permissible value is 12.5 m/s
(level 6 on the "Beaufort scale").
CONFIGURATION FOR UNDERGROUND OPERATIONS
Merlo machines are fitted for outdoor use.
When using them in closed, underground environments or in places where a risk of explosion exists, special equipment can be
fitted on the machine. These shall be defined when ordering the machine and its attachments.
FIRST COMMISSIONING OR RECOMMISSIONING AFTER A LONG SHUTDOWN
Before operating the machine for the first time, or after a long shutdown, the following operations should be carried out:
-
check that the machine is not damaged
- check that the mechanical parts of the machine are in prime condition and not rusted
- check both the engine coolant level and the coolant level for the service hydraulic system
- check the tire wear level
- check that the lights and the electrical equipment work correctly
- check for any oil leaks from the fittings or the pipes of the hydraulic system
- check both the battery electrolyte level and the battery charge
- check that all protection devices are in their correct positions
- thoroughly grease all the mobile parts of the machine