MERLO P25.6, Инструкция по эксплуатации, Страница: 64 / 232

5 - OPERATING INSTRUCTIONS
5 - 4
WARNING!
Manoeuvring loads suspended on cables, chains, slings or other is prohibited if the machine is not equipped with the
Merlo attachment specific to such a use (hook on forks, hook on carriage, crane boom, fly jib etc...)
When using compatible and homolgated Merlo attachments always refer to the relevant load chart present in the
holder provided in the cab.
If operations with the platform must be carried out near overhead electricity cables, the person in charge must ask
whoever manages the cables and the area's health and safety authorities for the minimum safety distance from the
cables, so that all necessary precautions for avoiding accident risks can be taken.
- bring the forks into a horizontal position and approach the load with care, lifting and extending the telescopic boom the
minimum possible or, if necessary, slowly advancing the machine (Fig.8)
- position the forks under the load taking care that they insert easily (Fig.9)
- shift the direction control (20) into position "N"
- lift the load a few centimeters and tilt the carriage upwards (Fig.10)
- if possible, slowly and carefully reverse the machine then lower and retract the telescopic boom to bring the load into the
transportation position (Fig.11)
- bring the machine, in the transport position, into the area where the load is to be placed
- lift and extend the telescopic boom until the load is above the stack; if necessary advance the machine with care. (Fig.12)
- shift the direction control (20) into position "N"
- bring the forks into a horizontal position and correctly place the load on top of the stack, lowering and retracting the
telescopic boom (Fig.13). Reverse the machine in order to retract the forks