MERLO P25.6, Инструкция по эксплуатации, Страница: 116 / 232

7 - SECURITY PERIODICAL INSPECTIONS
7 - 2
PERIODICAL INSPECTIONS REGISTRATION CARD
The following card must be reproduced (i.e. photocopied) and used to record the inspections to be carried out following the
periods as reported in the table. In case the cell between the line and the column is not highlighted, the inspection is not
necessary. The operations hereafter listed must be carried out following the expirations in working hours or in months,
whichever come first. Inspections of the machine and following recording on the card must be carried out by the person in
charge of the operations (e.g. Owner, site manager, etc.). The duly filled in cards must be kept by the machine user and must
be at disposal for possible checking by the authorized inspection organisation.
TYPE OF MACHINE CHASSIS NUMBER CHECKER NAME
FUNCTION TO BE CHECKED
PERIOD IN HOURS / MONTHS
Each
250 hours or 2 months
Each
500 hours or 6 months
Each
1000 hours or 1 year
Check
Date
Restoration
Date
Check
Date
Restoration
Date
Check
Date
Restoration
Date
Check of the overload prevention system
acustic alarm
…/…/… …/…/… …/…/… …/…/… …/…/… …/…/…
Check of the overload prevention system visual
alarm
…/…/… …/…/… …/…/… …/…/… …/…/… …/…/…
Check of the overload prevention system
movements lock-out
…/…/… …/…/… …/…/… …/…/… …/…/… …/…/…
Check of the presence inside the cab of the
instruction handbook for operating and
maintenance
…/…/… …/…/… …/…/… …/…/… …/…/… …/…/…
Check spirit level calibration …/…/… …/…/… …/…/… …/…/… …/…/… …/…/…
Check of the the hydraulic system pressure …/…/… …/…/… …/…/… …/…/…
Check of the rams' stop valve …/…/… …/…/… …/…/… …/…/…
Check of the parking brake …/…/… …/…/… …/…/… …/…/…
Check of the three modes steering …/…/… …/…/… …/…/… …/…/…
Check of the power steering pressure
calibration
…/…/… …/…/… …/…/… …/…/…
Check of the presence and conditions, inside
the cab and on the machine, of the instructions
plates
…/…/… …/…/…
Signature: Machine total working hours:
WARNING ! Before carrying out any of the following operations, which reqiure machine movement, make sure
that no persons or things are in the machine's operating area.
In case of operations which require the lifting of a load, make sure that the machine is on a compact surface and that it
is properly levelled.
Should these checks reveal any problems, do not use the machine until the problems have been resolved.