MERLO P25.6, Инструкция по эксплуатации

Страница: 123 / 232

8 - ATTACHMENTS AND OPTIONAL EXTRA
8 - 3
• TABLE FOR THE DETERMINATION OF PERMISSIBLE MASSES, AXLE LOADS AND TYRE LOAD CAPACITIES
Please refer to the table below for permissible total masses on both front and rear axle and for the maximum permissible tyre
load of your machine.
These data are also useful to identify the most suitable hydraulic jack to be used for tyre replacement (see paragraph "WHERE
TO PLACE HYDRAULIC JACKS" in this chapter).
MACHINE
TECHNICALLY PERMISSIBLE MASS (kg)
PERMISSIBLE TYRE LOAD PER
AXLE (kg)
TOTAL FRONT REAR FRONT REAR
P25.6 6400 3200 3200 3200 3200
• TABLE FOR THE DETERMINATION OF MAXIMUM PERMISSIBLE LIMITS FOR TOWED MASSES
Please refer to the table below for maximum permissible limits for towed masses, for the determination of the maximum vertical
load on the rear tow hook, as well as on the available braking systems for trailers.
NOTE!
The data regarding the maximum permissible limits for towed masses are also shown on the type-approval plate in the
front part of the cab (see paragraph "IDENTIFICATION AND TYPE-APPROVAL PLATES" in chapter "TECHNICAL DATA
OF YOUR MACHINE").
MACHINE
TOW CAPACITY (kg) VERTICAL
LOAD ON THE
HOOK (kg)
NO
BRAKING
MECHANICAL
BRAKING
INERTIA
BRAKING
HYDRAULIC
BRAKING
PNEUMATIC
BRAKING
P25.6 2500 5000 6000 12000 NO 420
• TABLE FOR THE DETERMINATION OF DRIVER-PERCEIVED NOISE LEVEL (measured in compliance with Directive
2009/76/EC) AND OF NOISE OF TRACTORS IN MOTION (measured in compliance with Annex VI to Directive 2009/63/EC).
MACHINE
NOISE OF THE MACHINE IN MOTION
(in compliance with Directive 2009/63/EC)
DRIVER-PERCEIVED NOISE
(in compliance with Directive 2009/79/EC)
With cab window closed With cab window open
P25.6 83 85 86
• TABLE FOR THE DETERMINATION OF VIBRATION LEVEL (in compliance with Directive 78/764/EEC)
The table below shows the vibrations transmitted by the driver's seat, divided depending on the make and type of seat installed
on the tractor. Check the model installed in the cab of your machine, and refer to the data provided below.
SEAT MODEL CATEGORY CLASS
TYPE-
APPROVAL
DRIVER’S
WEIGHT
Aws [m/s²]
(Dir. 78/764)
KAB Seating 11T6 A I / II / III e11 0997
light 1.13
heavy 1.01
KAB Seating 156, 15T6, 15E1, 15T1 A I / II / III e11 0995
light 1.13
heavy 1.01
ACTIVIO SERIES SEAT – S698 A II / III e13 0021
light 1.64
heavy 0.64
ACTIVIO SERIES SEAT – S55 A II / III e13 0020
light 1.17
heavy 0.98
GRAMMER MSG95 A II / III 100514
light 1.04
heavy 0.64