9
230V~
+/- 10%
50Hz
Model
CM475
(enclosure
required)
Ω
8.2
+
+
+
+
+ +
opening beam
closing beam
closing beam
closing beam
PHO1
PHO2
Radio
433MHz
Jumper OFF
Jumper ON
BL
BL
Grey
WIRING DIAGRAM
TECHNICAL DATA OF CONTROL BOARD
Voltage:
230 V~ ±10% 50 Hz
Transformer:
230 V / 24 V, 105 VA
Output Motor:
24 VDC
Consumption max.:
max. 400 W (in operation)
Consumption Standby:
max. 4 W (without accessories)
Operating temperature:
-20º C ÷ 55º C
Modes:
Standard, Automatic
Measurements:
145 x 110 mm (without box)
Protection class Box:
IP45
Fuse:
2 x 2 A (slow blow fuse)
Remote control:
max. 180 x Rolling Code
feasible frequencies:
433 MHz
The motor control unit is a highly modern electronic unit controlled by
a microprocessor. It has all wiring facilities and functions required for
safe operation. The electronics can be used for the precise
adjustment of the push-pull torque. The gate can be held by hand if
the fitting/setting is correct. During operation, the gate can be
stopped at all times via remote control, push-button or key-operated
switch. The gate wing requires a firm stop for the “OPEN” and
“CLOSED” positions.
Humidity and water will destroy the control board. Make sure under
all circumstances that water, humidity or dammed-up water cannot
penetrate the control board. All openings and cable entries must be
sealed watertight.
