Merlin G915D, Инструкции по установке и использованию

Страница: 4 / 28

G915
D
May 05
4
Manually opening the gate
You can release the gate from the opener.
Insert the key into the lock on the side of
the opener. Turn the key 45 degrees and
the gate will be released from the drive.
To reconnect the gate to the drive, it may
be necessary to move the gate back to
the same position as where it was before
unlocking.
Maintenance
In an area where ant or insect infestation is
likely, regularly spray around the opener and
any electrical installation with insecticide. In
normal conditions it is not expected that any
additional lubrication or service is required.
Keep the path of the gate free from debris
and foliage.
The gate and its moving parts may sustain damage or wear, presenting additional load to
the opener. Frequently examine the installation for signs of wear or damage. Do not use if
repair or adjustment is needed as the gate may cause injury.
Each month check the sensitivity of your gate while it is closing and opening. Arrange
for an Authorised Installer to adjust if necessary since an incorrect adjustment may be
hazardous.
Each month check that any non-contact beam sensors function correctly by obstructing
them while the gate is moving. The gate should stop, or reverse. Ensure the beams are
clear of any obstructions or dirt and ensure they are aligned towards each other.
Insert key here &
turn 45 degrees
to release
the drive.