Merlin G915D, Инструкции по установке и использованию

Страница: 3 / 28

3
Important safety instructions for
use
WARNING
It is important for the safety of persons to follow all the instructions for
use. Save these instructions.
Controls are not a toy
Do not allow children to play with fixed or remote controls.
Check the gate and drive for wear
Frequently examine the installation for imbalance and signs of wear or damage.
Check that the manual release functions correctly.
Do not use if repair or adjustment is necessary.
Test the safety system every month
Every month, test that the gates stop or reverse in response to an obstruction, and that
interrupting the beam of and photo-electric safety beam also causes the gate to stop or
reverse..
Do not use if repair or adjustment is necessary.
Disconnect power before maintenance
Always disconnect the power supply from the drive before cleaning or maintaining the
gate or drive. The drive or gate may operate unexpectedly due to other users with remote
controls, or due to automatic closing (if enabled).
Become familiar with the controls and manual release before use
Before using the gate and drive, locate the manual release and become familiar with its
operation. Note where the key is located, in the case of a power cut or any failure of the
drive or gate.
Contents
Manually opening the gate 4
Maintenance 4
Learning wireless controls 5
Deleting all wireless controls 5
Deleting selected wireless controls 5
Site requirements 6
Installation clearances 9
Board setup 10
Make all connections 11
Set the application mode 14
Learn a remote control 14
Set motor limit cams 14
Easy setup 15
Controls 16
Professional setup 20
Testing the gate operation 21
Troubleshooting 22
Warranty 24
Specifications 25
Service Centres 26
Quick setup guide 27
Commissioning check sheet 28