COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Motherboard Removal
1. Turn off the game and unplug it from its power source.
2. Open the front door and slide the CPU shelf into its service position. See Figure 1.
3. Use the Mitsubishi motherboard diagram in the
Motherboard Diagrams
section to determine
connector locations, then disconnect all connections to the board. NOTE: Be sure to read the
Motherboard Handling Precautions before handling the board.
4. Remove the screws securing the motherboard assembly to the game and remove the board.
Insert the board into an anti-static bag for storage.
Motherboard Installation
1. Place the new motherboard in the game and fasten it with the existing hardware.
2. Reconnect all connections to the board.
3. Slide the CPU shelf back into the game, then close the front door.
4. Plug in and turn on the game.
Hard Drive Removal
1. Turn off the game and unplug it from its power source.
2. Open the front door and slide the CPU shelf into its service position. See Figure 1.
3. Remove the screw fastening the adapter carriage plate to the game.
4. Remove the 4 screws and shoulder washers securing the hard drive to the adapter carriage
plate. See Figure 1.
5. Slide the hard drive forward until you’re able to remove the 4-pin power connector and ribbon
cable from the hard drive.
Hard Drive Installation
1. Connect the power connector and ribbon cable to the new hard drive.
2. Secure the hard drive to the adapter carriage plate with the 4 screws and shoulder washers.
See Figure 1.
3. Fasten the adapter carriage plate to the game with the screw removed earlier.
4. Slide the CPU shelf back into the game and close the front door.
5. Plug in and turn on the game.
Monitor Removal
1. Turn off the game and unplug it from its power source.
2. Unlock and open the front bezel and rear door to gain access to the monitor section.
3. Disconnect the touchscreen cable and all harnesses from the monitor.
4. Remove the front and rear bolts (2 per side) securing the monitor shelf to the cabinet. See
Figure 2.
5. Pull the monitor out through the rear door.
Troubleshooting Information - Removal/Installation of Major Assemblies -
Blue MAXX Upright
Megatouch MAXX Technical Reference Manual
ATTENTION:
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES
Removal/Installation of Major Assemblies -
Blue MAXX Upright
Содержание MAXX Upright
Страница 39: ...Section 2 Hard Drive Information Hard Drive Numbers Program Numbers Part Numbers Security Key Numbers...
Страница 90: ...Section 5 Motherboards Circuit Board Cross Reference Chart Telco Mitsubishi Itox Unicorn I O Board Pinouts...
Страница 98: ...Section 7 Technical Service Bulletins...