COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
ATTENTION:
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES
Removal/Installation of Major Assemblies -
MAXX Select/Slim MAXX Countertop
Troubleshooting Information - Removal/Installation of Major Assemblies -
MAXX Select - Slim MAXX Countertop
Megatouch MAXX Technical Reference Manual
Motherboard Removal
1. Turn off and unplug the game.
2. Unlock and open the rear door.
3. Lift the spring-loaded pin (see Figure 1) and carefully slide the CPU shelf out from the game
and into its service position.
4. Use the
Motherboard Diagrams
section to determine the board type in your game, then discon-
nect all connections to the board.
5. Motherboard Removal:
Mitsubishi
:
Remove the 2 screws securing the motherboard assembly to the shelf and the 2 screws
holding the 2 standoffs that are mounted to the shelf. After removing the standoffs, remove the
board and insert it into an anti-static bag for storage. NOTE: Be sure to read the Motherboard
Handling Precautions before handling the board.
Unicorn
:
Remove the standoff securing one support bracket to the motherboard and the standoff secur-
ing the other support bracket to the audio board. Then disconnect the audio board and remove
the remaining standoff securing the motherboard to the game and remove the board. Insert the
board into an anti-static bag for storage. NOTE: Be sure to read the Motherboard Handling
Precautions before handling the board.
Motherboard Installation
1. Motherboard Installation:
Mitsubishi
:
Place the new motherboard in the game, then attach the 2 standoffs to the shelf and attach the
2 screws to the standoffs. Then replace the 2 screws fastening the motherboard to the shelf.
Unicorn
:
Place the new motherboard in the game and fasten the board to the game with the standoff.
After connecting the audio board, replace the standoffs fastening the support brackets to the
audio board and the motherboard.
2. Reconnect all connections to the motherboard.
3. Slide the CPU shelf back into the game until the spring-loaded pin clicks in place.
4. Close and lock the rear door.
5. Plug in and turn on the game.
Hard Drive Removal
1. Turn off and unplug the game.
2. Unlock and open the rear door.
3. Lift the spring-loaded pin (see Figure 1) and carefully slide the CPU shelf out from the game
and into its service position.
Содержание MAXX Upright
Страница 39: ...Section 2 Hard Drive Information Hard Drive Numbers Program Numbers Part Numbers Security Key Numbers...
Страница 90: ...Section 5 Motherboards Circuit Board Cross Reference Chart Telco Mitsubishi Itox Unicorn I O Board Pinouts...
Страница 98: ...Section 7 Technical Service Bulletins...