Configuring the digital surround controller without a computer
77
●
Turn on Gain/Sub mode, as described above.
●
Select the source you want to adjust, with loud source
material playing.
The display shows a Clip indicator, and the current sensitivity of
the source in dB.
For example:
Radio • +9
If you have selected a digital source you cannot adjust the
sensitivity and the display shows NA.
The Clip indicator changes to show the peak input level as
follows:
Display
What it means
Radio ••••+9
Input clipped; reduce sensitivity.
Radio ••• +6
Input correct; just below clipping.
●
Press
<
or
>
(remote) until the
display shows:
Gain • +9
●
Press
A
or
V
(remote) to adjust the sensitivity until three bars
are showing in the loudest passages.
●
Repeat for any other analogue sources you want to adjust.
●
Turn off Gain/Sub mode, as described above.
To adjust the subwoofer crossover
frequency
The 561 allows the crossover frequency for any subwoofers
which you have to be adjusted between 30 and 120Hz. The
crossover can be set independently for Music, Logic, and 5.1
Movie presets. The default is the THX standard of 80Hz.
●
Turn on Gain/Sub mode, as described above.
●
Press
<
or
>
(remote) until the display shows the current
crossover frequency.
For example:
Xover 80Hz
●
Press
A
or
V
(remote) to set the crossover frequency.
Содержание Digital Surround Controller 561
