Meridian Digital Surround Controller 561, Руководство пользователя

Страница: 28 / 131

Using the digital surround controller
21
Changing the display
The digital surround controller displays information about the
current settings on the twelve-character front panel display. In
addition, it can display the same information superimposed on a
video image. For more information about setting up the on-
screen display refer to Connecting video , page 56.
To change the display
●
Press Display .
Each time you press Display the display will step between the
options shown in the table opposite.
In addition, the following symbols on the front panel display
indicate which of the DSP processing modes are operating:
Symbol What it means
THX processing is operating.
Dolby processing is operating.
Input is DTS.
MPEG Input is MPEG.
Display option Example
DSP preset and volume
Music 65
DSP preset and THX gain
Music -22
Source and volume
Radio 65
Audio stream
AC3 3/2.1 44
Blank
The audio stream display option shows the following three
pieces of information about the audio stream:
AC3 3/2.1 44
Sample rate:
44
44kHz
48 48kHz
32 32kHz
NL Not locked
Format:
PCM 2-channel PCM
AC3
Dolby Digital
DTS DTS encoding
MPG MPEG encoding
MLP MLP encoding
Input channels:
Front/Rear.LFE