Configuring the digital surround controller without a computer
78
For THX loudspeaker systems you should not adjust these
settings – they should be left at 80Hz. 80Hz is also the
recommended setting for all movie listening. You may prefer,
however, to lower the crossover frequency for music if your main
speakers have good bass handling down to, say, 50Hz.
To use the sinewave sweep test
Gain/Sub mode includes a sinewave signal test, to help you set
the subwoofer crossover frequencies, or check for room
resonances.
●
Turn on Gain/Sub mode, as described above.
●
Press
<
or
>
(remote) until the
display shows:
Sine Off
●
Press
A
to turn on the sinewave signal.
The display shows:
Pause 80Hz
●
Press
A
or
V
to start the sinewave sweeping up or down in
frequency, respectively. Press the key twice to sweep more
quickly.
The display shows the direction and frequency.
For example:
Sine >>175Hz
You can then use the
A
or
V
keys to change the speed or
direction of sweep, pause the sweep, or turn off the sinewave.
Содержание Digital Surround Controller 561
