Configuring the digital surround controller using a computer
93
Either option can be set to
Last valid
to leave the corresponding
setting unchanged when you select the source. You would
usually set
Video Input
to
Last valid
for audio sources such as
CD, Radio, Tape1, and Tape2.
You can create a source with
Main input
set to
Last valid
if you
want it to change some other aspect of the current source, such
as its DSP preset, without changing the selected input.
If you have specified a digital input for the main audio input:
●
Specify the precision for the source by choosing an option
from the
Precision
drop-down menu.
All CDs and laserdiscs are currently 16-bits. The 518 provides
24-bits. If in doubt choose
24-bit
.
The
Extra analogue input
drop-down menu allows you to select
an extra analogue input for copying digital sources. Select this if
your digital source also provides an analogue output, and you
want to make analogue recordings from it.
If you have chosen an analogue input for the main audio input:
●
Specify the sensitivity of the input by choosing an appropriate
option from the
Sensitivity
drop-down menu.
Note that you can also adjust the sensitivity of any analogue
source interactively, using Gain/Sub mode. See
To adjust the
sensitivity of analogue sources
, page 76.
Содержание Digital Surround Controller 561
