Meridian Digital Surround Controller 561, Руководство пользователя

Страница: 13 / 131

6
Introduction
Tape outputs 2 x stereo analogue for tape and
second zone, 470
Ω
output impedance.
With additional module: independent
ADC and DAC for analogue and digital
tape loop, variable analogue tape out.
Headphone output only available with
Tape card fitted – full volume control
and headphone amplifier.
Control 2 x Meridian Comms.
9 pin D connector for RS232 PC Setup
and Control.
2 x triggers, active high, 9V up to
100 mA on 3.5mm DC jack.
Dimensions 321mm x 88mm x 332mm
(12.7" x 3.5" x 13.1") (W x H x D).
Weight 5kg (10lb).
Meridian Audio reserves the right to amend product
specifications at any time.
Available accessories
The following accessories are available from your dealer.
Meridian 511 S-patch Box
The Meridian 511 S-patch box provides a convenient way to
interconnect the S leads between up to eight Meridian DSP
digital loudspeakers. It is required if your 561 system includes
more than two DSP loudspeakers.
Expansion cards
A range of expansion cards will be available for the 561 to
extend its capabilities or add features.
The first of these is a Tape card, which provides conversion
between analogue and digital sources, so that analogue
recordings can be made of digital sources, and vice versa. The
Tape card also adds a headphone output to the back panel, with
independent control over the headphone volume.