Mercury Axius System Скачать руководство пользователя страница 37

Страница: 37 / 60

Section 2 - On the Water

CMD-4082082 / 90-8M0052072

eng

FEBRUARY 2011

Page 33

4. Press the "TRACK WAYPOINT" button on the Precision Pilot keypad. The "TRACK WAYPOINT" button light turns on and a

single horn beep sounds, indicating Track Waypoint engaged. Pilot tracks to the first waypoint on the chart plotter course.

Two horn beeps sound if Track Waypoint does not engage.

27701

"TRACK WAYPOINT" button

5. The VesselView "TRACK WAYPOINT" screen displays on VesselView for one second after pressing the "TRACK

WAYPOINT" button. The display shows the digital heading that the boat is traveling, the angles of the drives, and engine

speed in RPM. See

Mode Display

VesselView

NOTE: The displayed heading is based on magnetic North.

31413

Track Waypoint screen—dual engine application screen shown

NOTE: The Precision Pilot "TURN" buttons will not initiate turns when Track Waypoint mode is engaged. Turn features are

only available in Auto Heading mode.

Disengaging Track Waypoint Mode

Disengage the Track Waypoint mode by one of the following methods:
•

Press the "TRACK WAYPOINT" button on the Precision Pilot keypad. The "TRACK WAYPOINT" button light goes off and

Pilot goes to Standby. The "STANDBY" light turns on

•

Turn the steering wheel hard enough to overcome the force feedback and Pilot goes to Standby.

•

Move both ERC levers back to neutral and Pilot goes to Standby.

•

Press the "AUTO HEADING" button and Pilot goes to Auto Heading mode.

•

Turn off the chart plotter and Pilot goes to Standby.

Содержание Axius System





























































Результаты поиска

Содержание Axius System

Отзывы:

Бренды по названию

Популярные бренды

Mercury Axius System, Руководство пользователя

Результаты поиска

Содержание Axius System

Отзывы:

Бренды по названию

Популярные бренды