Mercury Axius System Скачать руководство пользователя страница 18

Страница: 18 / 60

Section 1 - Getting to Know the Axius System

Page 14

CMD-4082082 / 90-8M0052072

eng

FEBRUARY 2011

Function

Description

Skyhook

Engages and disengages Skyhook. Mode is only available when the joystick is centered, both engines are

running, G.P.S. and heading sensors are available, the boat is stationary, and levers are in neutral. Skyhook

can become active while drifting. The Skyhook light will flash until the boat slows itself down, then become solid

when Skyhook is set. For example, if you are drifting forward and press Skyhook, the drives will go to reverse

to slow the vessel. You may still drift forward. When the boat slows its self down, it will enable Skyhook. Skyhook

will not activate if the boat is underway.

Turn < and >

Each press of the button causes a 10 degree course change in auto heading. Holding the joystick port or

starboard (until the beep) initiates a one degree change in course. It affects no other autopilot features.

Waypoint
Sequence

Engages Waypoint Sequence, driving the boat on a course set with multiple waypoints on the chart plotter. The

waypoints must be on a route. See the chart plotter owners manual. Waypoint Sequence is available when the

"WAYPOINT SEQUENCE" button is pressed, and data (a NMEA‑0183 stream) is available from a chart plotter,

and the GPS and heading sensor signals are available. Waypoint sequence will follow a route automatically,

announcing arrival at each waypoint and then turning towards the next waypoint. Track Waypoint must be

enabled first then select Waypoint Sequence.

Track
Waypoint

Route Tracking is available when data (NMEA0183 stream) is available from a chart plotter, GPS, and heading

sensor signals are available. The boat will attempt to steer to a waypoint or a route from the chart plotter. Arrival

at the waypoint must be acknowledged before the vessel will proceed to the next waypoint along the route.

Auto
Heading

Engages Auto Heading mode, which will hold the boat on a fixed course at the speed that the operator chooses.

Heading control is available when the "Auto Heading" button is pressed, GPS and IMU signals are available.

(See "Turn < and >" for course adjustment information.) A chart plotter not needed for this feature.

Resume

Resumes previous Auto Heading course if the boat's direction has not been changed 90° or more.

NOTE: Moving the steering wheel will always take control of the boat. A slight detent will have to be overcome to give the operator

feedback that the they are taking control from the Precision Pilot. Changing gears using the electronic remote control (ERC) lever

will also disable the autopilot mode.

Содержание Axius System





























































Результаты поиска

Содержание Axius System

Отзывы:

Бренды по названию

Популярные бренды

Mercury Axius System, Руководство пользователя

Результаты поиска

Содержание Axius System

Отзывы:

Бренды по названию

Популярные бренды