Mercury Axius System Скачать руководство пользователя страница 12

Страница: 12 / 60

Section 1 - Getting to Know the Axius System

Page 8

CMD-4082082 / 90-8M0052072

eng

FEBRUARY 2011

To adjust ERC handle tension:
1. Remove the side cover of the handle needing adjustment.
2. Turn the adjustment screw clockwise to increase tension on the control handle and counter‑clockwise to decrease tension.
3. Adjust to tension desired.

Starboard side cover removed, port similar

a -

Detent tension adjustment screw, labeled

"De"

b -

Handle tension adjustment screw, labeled

"Fr"

Dual Handle Yacht Console Control—Operation and Adjustment

Operation

Operation of shift and throttle is controlled by the movement of the control handle. Push the control handle forward from neutral

to the first detent for forward gear. Continue pushing the handle forward to increase speed. Pull the control handle back from

neutral to the first detent for reverse gear. Continue pulling the handle back to increase speed.

24559

Adjustment

1. Control handle tension adjustment screw ‑ This screw can be adjusted to increase or decrease the tension on the control

handle (cover must be removed). This will help prevent unwanted motion of the handle in rough water. Turn the screw

clockwise to increase tension and counterclockwise to decrease tension. Adjust to tension desired.

28087

Содержание Axius System





























































Результаты поиска

Содержание Axius System

Отзывы:

Бренды по названию

Популярные бренды

Mercury Axius System, Руководство пользователя

Результаты поиска

Содержание Axius System

Отзывы:

Бренды по названию

Популярные бренды