Mercury Racing HP565, Руководство пользователя, Страница: 91 / 151

MAINTENANCE
eng
79
4. Remove the bilge plug. The oil drain hose is tethered to the
plug.
a - Bilge drain plug
b - Tether
c - Oil drain plug
d - Bilge drain flange
e - Oil drain hose
5. Pull the oil drain hose through the bilge drain flange.
6. Place an appropriate container directly under the oil drain
hose.
7. Using two wrenches, separate the oil drain hose plug from
the oil drain hose, and allow the crankcase oil to drain until
empty.
8. Place a container below the oil filter.
NOTE: To allow the oil to drain from the filter, loosen the filter
enough to break the internal vacuum . Let the oil drain back into
the system for 15 minutes prior to complete removal of the filter.
9. Remove the oil filter from the adaptor and discard the old oil
filter and the old sealing ring.
10.Coat the sealing ring on new the filter with motor oil. Install
the new sealing ring and filter. Tighten the filter securely. Do
not over‑tighten.
11.Using two wrenches, connect the oil drain hose plug to the
oil drain hose and place it back into the boat.
12.Tighten the bilge drain plug.
13.Remove the oil filler cap. Add oil to bring the level up to, but
not over, the "FULL" mark on the dipstick.
6150
e
d
c
b
a