Mercury Racing HP565, Руководство пользователя, Страница: 117 / 151

MAINTENANCE
eng
105
NOTICE
Without sufficient cooling water, the engine, the water pump,
and other components will overheat and suffer damage.
Provide a sufficient supply of water to the water inlets during
operation.
9. Supply cooling water to the engine.
10.Start the engine. Check for gasoline leaks around the fuel
filter assembly. If leaks exist, stop the engine immediately.
Recheck the filter installation, clean spilled fuel, and properly
ventilate the engine compartment. If leaks continue, stop
engine immediately and contact your authorized Mercury
MerCruiser dealer.
Corrosion and Corrosion Protection
Whenever two or more dissimilar metals (such as those found on
the sterndrive) are submerged in a conductive solution, such as
saltwater, polluted water, or water with a high mineral content, a
chemical reaction takes place causing electrical current to flow
between metals. The electrical current flow causes the metal that
is most chemically active, or anodic, to corrode. This is known as
galvanic corrosion and, if not controlled, it will, in time, cause the
need for replacement of power package components.
Refer to the Quicksilver booklet,
Everything You Need to Know
About Marine Corrosion
for more corrosion information.
NOTICE
Using magnesium anodes in salt water causes an
electrochemical reaction on the metal surface of the drive,
resulting in corrosion damage from the paint blistering and
peeling off the drive. Use magnesium anodes in fresh water
only.