Mercury Racing HP565 Скачать руководство пользователя страница 88

Страница: 88 / 151

MAINTENANCE

eng

CLEANING

Contact your authorized Mercury MerCruiser dealer.

Changing Fluids

See the

Maintenance Chart

for the lubricant change frequency.

The lubricant should be changed before placing the boat in

storage.
Power trim and power steering fluids do not require changing.

CRANKCASE OIL AND FILTER (BOAT IN THE WATER)

IMPORTANT: When changing the oil, make sure that the engine

is near operating temperature. Use only the recommended motor

oil (refer to

Specifications

1. With the engine off but at normal operating temperature,

remove the dipstick.

2. Install the crankcase oil pump onto the dipstick tube.
3. Insert the hose end of crankcase oil pump into an

appropriate container and, using the pump handle, pump

until the crankcase is empty.

a -

Crankcase oil pump

b -

Crankcase oil pump hose

4. Remove the crankcase oil pump.
5. Place a container beneath the oil filter.

7983

Содержание HP565
























































































































































Результаты поиска

Содержание HP565

Отзывы:

Mercury Racing HP565, Руководство пользователя, Страница: 88 / 151

Результаты поиска

Содержание HP565

Отзывы: