Mercury Racing HP565 Скачать руководство пользователя страница 5

Страница: 5 / 151

eng

Warranty Message

WARNING

The operator (driver) is responsible for the correct and safe

operation of the boat, the equipment aboard and the safety of

all occupants aboard. We strongly recommend that the

operator read this Operation, Maintenance and Warranty

Manual and thoroughly understand the operational instructions

for the power package and all related accessories before the

boat is used.

The product you have purchased comes with a limited warranty

from Mercury Marine; the terms of the warranty are set forth in

the

Warranty Information

section of this manual. The warranty

statement contains a description of what is covered, what is not

covered, the duration of coverage, how to best obtain warranty

coverage, important disclaimers and limitations of damages, and

other related information. Please review this important

information.

Safety Alerts and Notices

Throughout this publication, dangers, warnings, cautions, and

notices, accompanied by the international HAZARD symbol

are used to alert the operator and technician to special

instructions concerning a particular service or operation that may

be hazardous if performed incorrectly or carelessly. Observe

these safety alerts carefully.
These safety alerts alone can not eliminate the hazards they

signal. Strict compliance to these special instructions when

performing the service, and common sense operation are major

accident prevention measures.

DANGER

Indicates a hazardous situation which, if not avoided, will result

in death or serious injury.

Содержание HP565
























































































































































Результаты поиска

Содержание HP565

Отзывы:

Mercury Racing HP565, Руководство пользователя, Страница: 5 / 151

Результаты поиска

Содержание HP565

Отзывы: