Mercury Racing HP565 Скачать руководство пользователя страница 6

Страница: 6 / 151

eng

WARNING

Indicates a hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION

Indicates a hazardous situation which, if not avoided, could

result in minor or moderate injury.

NOTICE

Indicates a situation which, if not avoided, could result in

engine or major component failure.

IMPORTANT: Identifies information essential to the successful

completion of the task.

NOTE: Indicates information that helps in the understanding of a

particular step or action.

WARNING

The engine exhaust from this product contains chemicals

known to the state of California to cause cancer, birth defects

or other reproductive harm.

Mercury Marine, Fond du Lac, Wisconsin U.S.A.
Printed in U.S.A.
© 2013, Mercury Marine
Mercury, Mercury Marine, MerCruiser, Mercury MerCruiser,

Mercury Racing, Mercury Precision Parts, Mercury Propellers,

Mariner, Verado, Vazer, #1 On The Water, Alpha, Bravo, Pro

Max, OptiMax, Sport‑Jet, K‑Planes, MerCathode, SmartCraft,

VesselView, Quicksilver, Zero Effort, M with Waves logo,

Mercury with Waves logo, and SmartCraft logo are all registered

trademarks of Brunswick Corporation. Mercury Product

Protection logo is a registered service mark of Brunswick

Corporation.

Содержание HP565
























































































































































Результаты поиска

Содержание HP565

Отзывы:

Mercury Racing HP565, Руководство пользователя, Страница: 6 / 151

Результаты поиска

Содержание HP565

Отзывы: