Mercedes-Benz Sprinter, Руководство по эксплуатации

Страница: 95 / 354

▌ License plate lamp
Requirements:
R
License plate lamp: light bulb type W 5 W
#
Switch off the lighting system.
#
Place a screwdriver, for example, at opening
2 between lamp 3 and panel 1 and care-
fully pry off lamp 3 .
#
Remove lamp 3 from panel 1 .
#
Rotate the bulb holder by around 45° and
detach it from the lamp.
#
Remove the light bulb.
#
Insert the new bulb into the bulb holder.
#
Insert the bulb holder into the lamp and rotate
it by around 45°.
#
Insert the lamp into the panel opening until it
engages.
Replacing rear light bulbs (chassis)
▌ Overview of rear light source types (chassis)
You can replace the following light sources.
Vehicles with standard tail lamps
1
Clearance lamp: R 5 W
2
Tail light: R 5 W
3
Brake light: P 21 W
4
Turn signal lights: PY 21 W
5
Backing up light: P 21 W
6 Rear fog light (driver's side): P 21 W
7
License plate lamp: R 5 W
▌ Replacing the tail lamps on the chassis
Requirements:
R
Rear fog lights: bulb type P 21 W
R
License plate lighting: bulb type R 5 W
R
Backing up lights: bulb type P 21 W
R
Turn signal lights: bulb type PY 21 W
R
Clearance lamps: bulb type R 5 W
R
Brake lights: bulb type P 21 W
R
Tail lights: bulb type R 5 W
1
Light lens
2
Screws
3
Rear fog light
4
License plate lamp
5
Backing up light
6
Turn signal light
7
Clearance lamp
8
Brake light
9
Tail light
#
Switch off the lighting system.
#
Unscrew screws 2 and remove light lens 1 .
#
Remove the plug from the bulb mount.
#
Gently turn the bulb counter-clockwise and
take it out of the socket.
#
Insert the new bulb into the socket and turn it
clockwise.
#
Position light lens 1 and tighten screws 2 .
Light and vision 93