Mercedes-Benz Sprinter, Руководство по эксплуатации

Страница: 219 / 354

#
Replace cap 1 and turn it clockwise until it
engages.
#
Check the oil level again. Check using the on-
board computer (
/
page 214), check with the
oil dipstick (
/
page 215).
#
In the case of vehicles with engines that do not
have an oil dipstick, check the oil level with the
on-board computer after the next journey
( / page 214).
It is necessary to run the engine for an extended
period after each oil top-up to correctly detect the
oil level. Fill level changes during oil top-ups may
not be immediately visible. Depending on the driv-
ing profile, the new oil level can only be displayed
after a driving time of up to 60 minutes.
To avoid damage due to overfilling, do not add
more than 0.26 gal (1 liter).
Check the oil level again after a longer period.
Checking the coolant level
&
WARNING Risk of burns from hot compo-
nent parts in the engine compartment
Certain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of the exhaust system.
#
Allow the engine to cool down and only
touch component parts described in the
following.
If you have to carry out any work in the engine
compartment, touch only the following compo-
nents:
R
Hood
R
Engine oil filler opening cap
R
Washer fluid reservoir cap
R
Coolant expansion reservoir cap
&
WARNING Risk of burns when opening the
hood
If you open the hood in the event of an over-
heated engine or fire in the engine compart-
ment, the following situations may occur:
R
You may come into contact with hot gases.
R
You may come into contact with other
escaping hot operating fluids.
#
Before opening the hood, allow the
engine to cool down.
#
In the event of a fire in the engine com-
partment, keep the hood closed and call
the fire service.
&
WARNING Risk of scalding from hot cool-
ant
If you open the cap, you could be scalded.
#
Let the motor cool down before opening
the cap.
#
When opening the cap, wear protective
gloves and safety glasses.
#
Open the cap slowly to release pressure.
Allow the engine and the engine cooling system to
cool down before checking the coolant level or
refilling coolant.
*
NOTE Paintwork damage due to coolant
If coolant gets on painted surfaces, the paint-
work can be damaged.
#
Add coolant carefully.
#
Remove spilled coolant.
Checking the coolant level
Coolant expansion reservoir (example)
#
Park the vehicle on a level surface.
#
Open the hood (
/
page 212).
#
Slowly turn the coolant expansion tank cap 1
half a turn counter-clockwise and allow over-
pressure to escape.
#
Turn coolant expansion tank cap 1 further
and remove it.
Maintenance and care 217