Mercedes-Benz GLC, Руководство оператора

Страница: 309 / 390

Problems with the 115 V power socket
Problem
Possible causes/consequences and M Solutions
The warning lamp on the
115 V power socket is
not lit.
The on-board voltage is too low because the battery is too weak.
X
Start the engine.
or
X
Charge the battery (
Y
page 340).
If the indicator lamp still does not light up:
X
Visit a qualified specialist workshop.
The temperature of the DC/AC converter is temporarily too high.
X
Remove the electronic device connector from the 115 V socket.
X
Let the DC/AC converter cool down.
If the indicator lamp still does not light up after cooling down the
converter:
X
Visit a qualified specialist workshop.
You have connected an electronic device that has a constant nominal
power of less than 150 watts, but has a very high switch-on current.
This device will not work. If you connect such a device, the 115 V
power socket will not supply it with power.
X
Connect a suitable electronic device.
mbrace
General notes
The mbrace system is only available in the USA.
You must have a license agreement to activate
the mbrace service. Make sure that your system
is activated and operational. To register, press
the ï Info call button. If any of the steps
mentioned are not carried out, the system may
not be activated.
If you have questions about the activation, con-
tact one of the following telephone hotlines:
Mercedes-Benz Customer Assistance Center at
1-800-FOR-MERCedes (1-800-367-6372) or
1-866-990-9007
Shortly after successfully registering with the
mbrace service, a user ID and password will be
sent to you by mail. You can use this password
to log onto the mbrace area under "Owners
Online" at http://www.mbusa.com.
The system is available if:
R
it has been activated and is operational
R
the corresponding mobile phone network is
available for transmitting data to the Cus-
tomer Center
R
a service subscription is available
Determining the location of the vehicle on a map
is only possible if:
R
GPS reception is available
R
the vehicle position can be forwarded to the
Customer Assistance Center
The mbrace system
To adjust the volume during a call, proceed as
follows:
X
Press the W or X button on the multi-
function steering wheel.
or
X
Use the multimedia system volume control.
Features
307
Stow
age
and
features
Z