Mercedes-Benz GLC, Руководство оператора

Страница: 295 / 390

Securing the ski/snowboard bag in the
cargo compartment
X
Fold the middle rear seat backrest forwards
(
Y
page 293).
X
Slide the ski and snowboard bag between the
two outside rear seat backrests. Ensure that
the wheels of the ski/snowboard bag are in
the cargo compartment.
X
Open the ski/snowboard bag with zip : and
place the skis or snowboards inside it.
X
Close the ski and snowboard bag.
X
Pull tensioning strap ; tight by the loose end
until the skis or snowboards are held firmly
inside the ski/snowboard bag.
X
Engage tensioning strap = in a diagonal pat-
tern on hooks ? in cargo tie-down rings A as
shown.
EASY-PACK quickfold rear bench seat
Important safety notes
G
WARNING
If the rear bench seat/rear seat and seat
backrest are not engaged they could fold for-
wards, e.g. when braking suddenly or in the
event of an accident.
R
The vehicle occupant would thereby be
pushed into the seat belt by the rear bench
seat/rear seat or by the seat backrest. The
seat belt can no longer offer the intended
level of protection and could even cause
injuries.
R
Objects or loads in the trunk/cargo com-
partment cannot be restrained by the seat
backrest.
There is an increased risk of injury.
Before every trip, make sure that the seat
backrests and the rear bench seat/rear seat
are engaged.
!
When folding the rear seat backrest for-
wards, ensure that there are no items lying on
the seat cushions. These items could other-
wise be damaged or could themselves dam-
age the rear seats.
Observe the loading guidelines (
Y
page 290).
The outside and the middle rear seat backrests
can be folded down separately to increase the
cargo compartment capacity. The division ratio
is 40/20/40.
Both outside seat backrests in the rear com-
partment are electrically unlocked with the
release handles either in the cargo compart-
ment or beside the seat backrests in the rear
compartment (vehicles with EASY-PACK tailgate
only). The corresponding rear seat backrests
then fold forward automatically.
Folding the rear seat backrest forwards
Preparation
X
Vehicles without memory function: if neces-
sary, move the driver's or front-passenger
seat forward.
X
Vehicles with memory function: when one or
both parts of the rear seat backrest are folded
forward, the respective front seat moves
forward slightly, when necessary, in order to
avoid contact.
When the engine is running, the driver's seat
does not move forward.
X
Fully insert the rear seat backrest head
restraints.
Stowage areas
293
Stow
age
and
features
Z