Mercedes-Benz GLC, Руководство оператора

Страница: 222 / 390

Important safety notes
G
WARNING
If you operate information systems and com-
munication equipment integrated in the vehi-
cle when driving, you may be distracted from
the traffic situation. You could also lose con-
trol of the vehicle. There is a risk of an acci-
dent.
Only operate this equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equip-
ment when the vehicle is stationary.
You must observe the legal requirements for the
country in which you are currently driving when
operating the on-board computer.
G
WARNING
If the instrument cluster has failed or mal-
functioned, you may not recognize function
restrictions in systems relevant to safety. The
operating safety of your vehicle may be
impaired. There is a risk of an accident.
Drive on carefully. Have the vehicle checked
at a qualified specialist workshop immedi-
ately.
If the operating safety of your vehicle is
impaired, pull over as soon as it is safe to do so.
Contact a qualified specialist workshop.
The on-board computer only shows messages or
warnings from certain systems in the multifunc-
tion display. You should therefore make sure
your vehicle is operating safely at all times.
For an overview, see the instrument panel illus-
tration (
Y
page 37).
Hybrid vehicles: make sure that you read the
separate operating instructions. Otherwise, you
may not recognize dangers.
Displays and operation
Instrument cluster lighting
The lighting in the instrument cluster, in the dis-
plays and the controls in the vehicle interior can
be adjusted using brightness control knob : .
X
Turn brightness control knob : up or down.
If you turn the light switch (
Y
page 112) to the
T , Ã or L position, the brightness
will depend upon the brightness of the ambi-
ent light.
i
The light sensor in the instrument cluster
automatically controls the brightness of the
multifunction display.
In daylight, the displays in the instrument
cluster are illuminated. A dimming function is
not possible in daylight.
Speedometer with segments
The speedometer is divided into segments
depending on the equipment.
The segments in the speedometer indicate
which speed range is available.
R
Cruise control activated (
Y
page 169):
The segments light up from the stored speed
to the end of the scale.
R
Distance Pilot DISTRONIC is activated
(
Y
page 172):
One or two segments in the set speed range
light up.
R
Distance Pilot DISTRONIC detects a vehicle in
front moving more slowly than the stored
speed:
The segments between the speed of the vehi-
cle in front and the stored speed light up.
220
Displays and operation
On-board
com
puter
and
dis
pla
ys