Mercedes-Benz GLC, Руководство оператора

Страница: 150 / 390

Transmission position and drive pro-
gram display
The current transmission position and drive pro-
gram appear in the multifunction display.
: Status symbol drive program
; Transmission position
= Gear
The arrows in the transmission position display
show how and into which transmission positions
you can shift using the DIRECT SELECT lever.
If the transmission position display in the mul-
tifunction display is not working, you should pull
away carefully to check whether the desired
transmission position is engaged. Ideally, you
should select transmission position h and
drive program E or S.
Transmission positions
B
Park position
This prevents the vehicle from rolling
away when stopped.
Only shift the transmission into posi-
tion j (
Y
page 146) when the vehi-
cle is stationary. The parking lock
should not be used as a brake when
parking. Always apply the electronic
parking brake in addition to the park-
ing lock in order to secure the vehi-
cle.
Park position j is automatically
engaged if:
R
you switch off the engine using the
SmartKey and remove the Smart-
Key
R
you switch off the engine using the
SmartKey or using the Start/Stop
button and open the driver's door
or front-passenger door
R
you open the driver's door when
the vehicle is stationary or when
driving at a very low speed and the
transmission is in position h or
k
In the event of a malfunction of the
vehicle's electronics, the transmis-
sion may lock in position j . Have
the vehicle electronics checked
immediately at a qualified specialist
workshop.
C
Reverse gear
You can only shift the transmission
into position k when the vehicle is
stationary (
Y
page 147).
148
Automatic transmission
Dr
iv
in
g
an
d
parkin
g