Mercedes-Benz GLC 200 4MATIC, Руководство пользователя

Страница: 433 / 601

The tyre-change tool kit includes the following:
R
Jack
R
Wheel wrench
R
Wheel studs
R
Extension attachment for wheel studs, if nec-
essary (depending on vehicle version)
R
Folding chock
R
Ratchet ring spanner
Preparing the vehicle for a wheel change
Requirements:
R
The vehicle is not on a slope.
R
The vehicle is on solid, non-slippery and level
ground.
R
The required tyre-change tool kit is available.
%
If your vehicle is not equipped with the tyre-
change tool kit, consult a qualified specialist
workshop to find out about suitable tools.
#
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
position.
#
Shift the transmission to position
j
.
#
Vehicles with AIRMATIC: set the normal vehi-
cle level (
/
page 284).
#
Switch off the vehicle.
#
Make sure that the vehicle cannot be started.
#
Place chocks or other suitable items under the
front and rear of the wheel that is diagonally
opposite the wheel you wish to change.
#
Unload the vehicle.
Removing and fitting the wheel trim/hub caps
Requirements:
R
The vehicle is prepared for a wheel change
(
/
page 430).
Plastic hub cap
#
To remove: turn the centre cover of the hub
cap anti-clockwise and remove the hub cap.
#
To fit: make sure that the centre cover of the
hub cap is turned anti-clockwise.
Aluminium hub cap
#
To remove: position socket 2 from the tyre-
change tool kit on hub cap 1 .
#
Position wheel spanner 3 on socket 2 .
#
Using wheel spanner 3 , turn hub cap 1
anti-clockwise and remove it.
#
To fit: follow the instructions above in reverse
order.
% Specified tightening torque: 25 Nm.
430 Wheels and tyres