Mercedes-Benz GLC 200 4MATIC, Руководство пользователя

Страница: 272 / 601

The system may be impaired or may not function,
particularly in the following situations:
R
In snow, rain, fog, heavy spray, if there is glare,
in direct sunlight or in greatly varying light
conditions.
R
If the sensors are dirty, misted up, damaged or
covered. (
/
page 237)
R
If the sensors are impaired due to interference
from other radar sources, e.g. strong radar
reflections in multi-storey car parks.
R
If a loss of tyre pressure or a defective tyre
has been detected and displayed.
R
In complex traffic situations where objects
cannot always be clearly identified.
R
If pedestrians, cyclists or vehicles move
quickly into the sensor detection range.
R
If road users are hidden by other objects or
are located close to other objects.
R
If the typical outline of a pedestrian or cyclist
cannot be distinguished from the background.
R
If a pedestrian or cyclist is not detected as
such, e.g. due to special clothing or other
objects.
R
If the driver's seat belt is not fastened.
R
On bends with a tight radius.
▌ Setting Active Brake Assist
Requirements:
R
The vehicle is switched on.
Multimedia system:
4
©
5
Settings
5
Assistance
5
Collision avoidance
#
Activate or deactivate the function.
%
It is recommended that you always leave
Active Brake Assist activated.
When Active Brake Assist is deactivated, the dis-
tance warning function, the collision warning, the
autonomous braking function and Evasive Steer-
ing Assist are deactivated.
%
If Active Brake Assist is deactivated, the
æ
symbol appears in the status bar of the driv-
er's display, and the system is reactivated the
next time the vehicle is started.
Setting the time of the brake application warnings
#
Select
Z
next to
Active Brake Assist
.
#
Select Early , Medium or Late .
% If ATTENTION ASSIST has detected indica-
tions of fatigue or a microsleep, the system
can issue a warning earlier than the set time
(country-dependent). Further information
about ATTENTION ASSIST (
/
page 244).
Speed Limit Assist
▌ Function of Speed Limit Assist
%
Speed Limit Assist uses OpenStreetMap data,
which is made available under the conditions
of the Open Database License (OBbL). For
more information, see: https://
www.osmfoundation.org/wiki/licence.
Speed Limit Assist detects speed limits with multi-
function camera and displays them in the driver's
display and optionally in the head-up display. The
camera also detects speed limits with a restric-
tion indicated by an additional sign (e.g. when
wet).
Observe the notes on driving systems and your
responsibility; you may otherwise fail to recognise
dangers (
/
page 237).
Driving and parking 269