Mercedes-Benz GLC 200 4MATIC, Руководство пользователя

Страница: 432 / 601

Notes on interchanging wheels
&
WARNING Risk of injury through different
wheel sizes
Interchanging the front and rear wheels can
severely impair the driving characteristics.
The disk brakes or wheel suspension compo-
nents may also be damaged.
#
Only interchange the front and rear
wheels if the wheels and tyres have the
same dimensions.
Interchanging the front and rear wheels if the
wheels or tyres have different dimensions can
render the general operating permit invalid.
Observe the instructions and safety notes on
"Changing a wheel" (
/
page 426)
The wear patterns on the front and rear wheels
differ:
R
front wheels wear more on the tyre shoulder
R
rear wheels wear more in the centre of the
tyre
Do not drive with tyres that have too little tread
depth. This significantly reduces traction on wet
roads (aquaplaning).
On vehicles with the same front and rear wheel
size, you can interchange the wheels every
5,000 to 10,000 km, depending on the wear.
Ensure the direction of rotation is maintained for
the wheels.
Notes on storing wheels
When storing wheels, observe the following notes:
R
After removing wheels, store them in a cool,
dry and preferably dark place.
R
Protect the tyres from contact with oil, grease
or fuel.
Overview of the tyre-change tool kit
Apart from some country-specific variants, vehi-
cles are not equipped with a tyre-change tool kit.
For more information on which tools are required
and approved to perform a wheel change on your
vehicle, consult a qualified specialist workshop.
Required tyre-changing tools may include,
forexample:
R
Jack
R
Chock
R
Wheel wrench
%
The jack weighs approximately 3.4 kg.
The maximum load capacity of the jack can
be found on the sticker affixed to the jack.
The jack is maintenance-free. If there is a
malfunction, please contact a qualified spe-
cialist workshop.
Tyre-change tool kit 1 is located under the load
compartment floor.
Wheels and tyres 429