Mercedes-Benz GLC 200 4MATIC, Руководство пользователя

Страница: 216 / 601

# Screw on the fastener of AdBlue
®
refill canis-
ter 4 .
#
Screw the disposable hose 3 onto the open-
ing of AdBlue
®
refill canister 4 until hand-
tight.
#
Screw the disposable hose 3 onto the filler
neck of the vehicle until hand-tight.
#
Lift up and tip AdBlue
®
refill canister 4 .
The filling process stops when the AdBlue
®
tank is completely full.
AdBlue
®
refill canister 4 can be removed
when it has been only partially emptied.
#
Unscrew and close the disposable hose
3
and AdBlue
®
refill canister 4 in reverse
order.
#
Replace AdBlue ® filler cap 2 and turn it
clockwise until it audibly engages.
#
Close fuel filler flap 1 .
#
Switch on the vehicle for at least 60 seconds.
%
If the vehicle could not be started as the
AdBlue
®
tank was empty, it can take up to
60 seconds for the refill to be detected.
#
Start the vehicle.
%
Avoid storing AdBlue
®
refill containers perma-
nently in the vehicle.
Charging the high-voltage battery (plug-in
hybrid)
Notes on charging the high-voltage battery
*
NOTE High-voltage battery damage due to
leaving the vehicle idle for lengthy periods
of time
Lithium-ion batteries experience a natural self-
discharge.
Exhaustive discharging can therefore occur if
the vehicle is idle for several months. This can
damage the high-voltage battery.
#
To avoid damage, please observe the fol-
lowing recommendations when handling
the high-voltage battery.
*
NOTE Accelerated ageing of the high-volt-
age battery due to not observing the fol-
lowing recommendations
As a result of its basic characteristics, the
storage capacity of and the amount of energy
available from the high-voltage battery decrea-
Driving and parking 213