Mercedes-Benz COMAND Online, Инструкция к добавке

Страница: 59 / 272

Address entry menu with destination address
:
Destination address
;
To start route calculation
X In the address entry menu, confirm
Start
by pressing
W
.
If no other route has been calculated, route
calculation starts immediately (Option 1). If
another route has already been calculated
(route guidance is active), a prompt
appears (option 2).
Option 1 — no route guidance active: route
calculation starts. While route calculation is
in progress, an arrow will indicate the direc-
tion to your destination. Below this, you will
see a message, e.g.
Calculating fast
route...
.
Once the route has been calculated, route
guidance begins. If the vehicle is travelling on
a non-digitised road, the system displays the
linear distance to the destination, the direc-
tion of the destination and the
Off road
message. In this case, the display will be
greyed out.
Option 2 – route guidance is already
active: if route guidance is already active, a
prompt will appear asking whether you wish
to terminate the currently active route guid-
ance.
X
Select Yes or No and press
W
to confirm.
If you select Yes , COMAND will stop route
guidance and start route calculation for the
new destination.
If you select
No
, COMAND will continue
with the active route guidance.
i Route calculation takes a certain amount
of time. The time depends on the distance
from the destination, for example.
COMAND calculates the route using the
digital map data.
The calculated route may differ from the
ideal route, e.g. due to roadworks or incom-
plete map data. Please also refer to the
notes about the digital map (
Y
page 107).
Entering and storing your home address
You can either enter your home address for
the first time (option 1) or edit a previously
stored home address (option 2).
X
Option 1: enter the address, e.g. a town,
street and house number (
Y
page 54).
X
Once you have entered the address, select
Save
in the address entry menu by turning
cVd
and sliding
ZV Æ
the COMAND con-
troller and press
W
to confirm.
X
Select Save as "My Address" and press
W
to confirm.
COMAND stores your home address as
My
address in the destination memory.
X
Option 2: proceed as described under
"Option 1".
A prompt appears asking whether the cur-
rent home address should be overwritten.
X
Select Yes and press
W
to confirm.
After selecting Yes , the Saving proce‐
dure successful
message appears.
Entering a postcode
Entering a postcode will delete a previously
entered town.
X
Select Postcode in the address entry menu
by turning
cVd
and sliding
ZV Æ
the
COMAND controller and press
W
to con-
firm.
You will see the postcode list either with
the character bar (option 1) or as a selec-
tion list (option 2).
Destination entry
57
Navigation system
Z