Mercedes-Benz COMAND Online, Инструкция к добавке

Страница: 153 / 272

it may not be possible to establish an Internet
connection.
Setting access data
Introduction
The Internet access data for your connected
mobile can be obtained from your mobile
phone network provider. The required setting
for the Internet access data in COMAND is
described below.
A selected/manually set mobile phone net-
work provider applies for the connected
mobile phone.
i Additional costs may incur if the incorrect
access data (details that are different from
the contract or details from another con-
tract/data package) is set.
i When you are driving your vehicle in a dif-
ferent country and using the COMAND
Online and Internet functions, additional
costs (roaming fees) may incur.
i While initialising the mobile phone for the
Internet connection, access data which is
already on the mobile phone may be over-
written. You should therefore check the
settings on the mobile phone (see the
mobile phone operating instructions).
i Adjust the access data settings when the
vehicle is stationary.
Selecting/setting Internet access
data
Calling up the list of mobile phone net-
work providers
X
Select the globe icon in the main function
bar by sliding
ZV
and turning
cVd
the
COMAND controller and press
W
to con-
firm.
The carousel view appears.
X Select
Settings
by sliding
V Æ
and turning
cVd
the COMAND controller and press
W
to confirm.
When you connect the mobile phone to
COMAND for the first time (
Y
page 114),
there is no mobile phone network provider
preset.
Provider: is followed by the entry
not selected .
If a mobile phone is already connected and
a mobile phone network provider has been
selected or manually set, their name
appears here.
X
Press
W
the COMAND controller.
The list of mobile phone network providers
appears.
Setting access data
151
COMAND Online and Internet