Mercedes-Benz COMAND Online, Инструкция к добавке

Страница: 35 / 272

MLP
Switching surround sound on/off
The example describes how to set the sur-
round sound for radio mode.
X
Press the
$
function button.
The radio display appears. You will hear the
last station played on the last waveband.
X
Select Sound by sliding
V Æ
and turning
cVd
the COMAND controller and press
W
to confirm.
X
Select surround and press
W
to confirm.
Setting surround sound (example: SLK)
X Select Logic7
®
on or Logic7
®
off by turn-
ing
cVd
the COMAND controller and press
W
to confirm.
Depending on your selection, surround
sound is switched on or off and the menu
is exited.
X
To exit the menu without saving: press
the
%
back button or slide
XVY
the
COMAND controller.
i Please note the following: for the opti-
mum audio experience for all passengers
when LOGIC7
®
is switched on, the balance
and fader settings should be set to the
centre of the vehicle interior.
You will achieve the best sound results by
playing high-quality audio and video DVDs.
MP3 tracks should have a bit rate of at least
128 kbit/s.
Surround sound playback does not func-
tion for mono signal sources, such as the
medium wave range (MW) in radio mode.
If radio reception is poor, e.g. in a tunnel,
you should switch off Logic 7
®
, as it may
otherwise switch between stereo and
mono and cause temporary sound distor-
tions.
On some stereo recordings, the sound
characteristics may differ from conven-
tional stereo playback.
Climate control status display
If you change the settings of the climate con-
trol system (see the vehicle Owner's Manual),
the climate status display appears for three
seconds at the bottom of the screen in the
COMAND display. It displays the current set-
tings of the various climate control functions.
The climate status display appears when you:
X
Turn one of the two temperature controls
and set the temperature for the left or
Climate control status display
33
At a glance