Mercedes-Benz 2007 CL 550, Руководство оператора

Страница: 487 / 723

486
Controls in detail
Useful features
Roadside Assistance button
•
왘
Press and hold Roadside Assistance
button
•
(for longer than
2 seconds).
A call to a Mercedes-Benz Roadside As-
sistance dispatcher will be initiated.
The button will flash while the call is in
progress. The message:
앫
“ Connecting call ” appears in the
multifunction display
앫
“ Roadside Assistance Activated ”
appears in the COMAND display
and the audio system is muted.
When the connection is established, the
message:
앫
“ Call connected ” appears in the multi-
function display
앫
“ Roadside Assistance Activated ”
appears in the COMAND display
The Tele Aid system will transmit data gen-
erating the vehicle identification number,
model, color and location (subject to avail-
ability of cellular and GPS signals).
A voice connection between the Roadside
Assistance dispatcher and the occupants
of the vehicle will be established.
왘
Describe the nature of the need for as-
sistance.
The Mercedes-Benz Roadside Assistance
dispatcher will either dispatch a qualified
Mercedes-Benz technician or arrange to
tow your vehicle to the nearest authorized
Mercedes-Benz Center. For services such
as labor and/or towing, charges may ap-
ply. Refer to the Roadside Assistance Man-
ual for more information.
These programs are only available in the
USA:
앫
Sign and Drive services: Services such
as jump start, a few gallons of fuel or
the replacement of a flat tire with the
vehicle spare tire are obtainable.
i
The indicator lamp in the Roadside Assis-
tance button
•
remains illuminated in red for
approximately 10 seconds during the system
self-check after switching on the ignition (togeth-
er with the SOS button and the Information
button
¡
).
See system self-check (
컄
page 483) if the indi-
cator lamp does not come on in red or stays on
longer than approximately 10 seconds.
If the indicator lamp in the Roadside Assistance
button
•
is flashing continuously and no
voice connection to the Response Center was
established, the Tele Aid system could not ini-
tiate a Roadside Assistance call (e.g. the relevant
mobile phone network is not available). The mes-
sage:
앫
“Call failed” appears in the multifunction dis-
play for approximately 10 seconds
앫
“Call could not be connected!” appears in
the COMAND display. Confirm the message
pressing
n
(
컄
page 84).
Roadside Assistance calls can be terminated us-
ing button
t on the multifunction steering
wheel or COMAND (
컄
page 120).