Mercedes-Benz 2007 CL 550, Руководство оператора

Страница: 162 / 723

161
Control systems
COMAND navigation (introduction)
Switching the geo-coordinate display on
or off
왘
Select “ Navi ” “ Navi ” “ Map Dis-
play ”.
The map display list appears.
왘
Select “ Coordinates ”.
The geo-coordinate display is switched
on or off, depending on the previous
status. A checkmark indicates which
status is active.
왘
Exiting menu: Slide
o m p
or press
back button
L
in the center console
(
컄
page 82).
Setting route mode
왘
Select “ Navi ” “ Navi ” “ Mode ”.
The mode list appears.
왘
Switching mode on or off:
Select desired modes.
Depending on the previous status, the
mode is switched on or off. A check-
mark indicates that the mode is
switched on. It is possible to switch on
more than one mode.
왘
Exiting menu: Slide
o m p
or press
back button
L
in the center console
(
컄
page 82).
COMAND will verify whether it can in-
corporate the modes if you select them
with route guidance active.
If it can, COMAND calculates a new
route while incorporating the modes
selected.
If it cannot, you will see and hear a cor-
responding message.
왘
Select “ OK ”.
COMAND calculates a new route.
Only those modes which can be in-
corporated are used.
i
This function allows you to set the following
options for route guidance:
앫
“Minimize Highways”
앫
“Minimize Toll Roads”
앫
“Minimize Tunnels”
앫
“Minimize Ferries/Motorail”